CHART NAME: {{ .Chart.Name }}
CHART VERSION: {{ .Chart.Version }}
APP VERSION: {{ .Chart.AppVersion }}

** Please be patient while the chart is being deployed **

{{- if .Values.diagnosticMode.enabled }}
The chart has been deployed in diagnostic mode. All probes have been disabled and the command has been overwritten with:

  command: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.command "context" $) | nindent 4 }}
  args: {{- include "common.tplvalues.render" (dict "value" .Values.diagnosticMode.args "context" $) | nindent 4 }}

Get the list of pods by executing:

  kubectl get pods --namespace {{ .Release.Namespace }} -l app.kubernetes.io/instance={{ .Release.Name }}

Access the pod you want to debug by executing

  kubectl exec --namespace {{ .Release.Namespace }} -ti <NAME OF THE POD> -- bash

In order to replicate the container startup scripts execute this command:

For Redis:

    /opt/bitnami/scripts/redis/entrypoint.sh /opt/bitnami/scripts/redis/run.sh

{{- if .Values.sentinel.enabled }}

For Redis Sentinel:

    /opt/bitnami/scripts/redis-sentinel/entrypoint.sh /opt/bitnami/scripts/redis-sentinel/run.sh

{{- end }}
{{- else }}

{{- if contains .Values.master.service.type "LoadBalancer" }}
{{- if not .Values.auth.enabled }}
{{ if and (not .Values.networkPolicy.enabled) (.Values.networkPolicy.allowExternal) }}

-------------------------------------------------------------------------------
 WARNING

    By specifying "master.service.type=LoadBalancer" and "auth.enabled=false" you have
    most likely exposed the Redis&reg; service externally without any authentication
    mechanism.

    For security reasons, we strongly suggest that you switch to "ClusterIP" or
    "NodePort". As alternative, you can also switch to "auth.enabled=true"
    providing a valid password on "password" parameter.

-------------------------------------------------------------------------------
{{- end }}
{{- end }}
{{- end }}

{{- if eq .Values.architecture "replication" }}
{{- if .Values.sentinel.enabled }}

Redis&reg; can be accessed via port {{ .Values.sentinel.service.ports.redis }} on the following DNS name from within your cluster:

    {{ template "common.names.fullname" . }}.{{ .Release.Namespace }}.svc.{{ .Values.clusterDomain }} for read only operations

For read/write operations, first access the Redis&reg; Sentinel cluster, which is available in port {{ .Values.sentinel.service.ports.sentinel }} using the same domain name above.

{{- else }}

Redis&reg; can be accessed on the following DNS names from within your cluster:

    {{ printf "%s-master.%s.svc.%s" (include "common.names.fullname" .) .Release.Namespace .Values.clusterDomain }} for read/write operations (port {{ .Values.master.service.ports.redis }})
    {{ printf "%s-replicas.%s.svc.%s" (include "common.names.fullname" .) .Release.Namespace .Values.clusterDomain }} for read-only operations (port {{ .Values.replica.service.ports.redis }})

{{- end }}
{{- else }}

Redis&reg; can be accessed via port {{ .Values.master.service.ports.redis }} on the following DNS name from within your cluster:

    {{ template "common.names.fullname" . }}-master.{{ .Release.Namespace }}.svc.{{ .Values.clusterDomain }}

{{- end }}

{{ if .Values.auth.enabled }}

To get your password run:

    export REDIS_PASSWORD=$(kubectl get secret --namespace {{ .Release.Namespace }} {{ template "redis.secretName" . }} -o jsonpath="{.data.redis-password}" | base64 -d)

{{- end }}

To connect to your Redis&reg; server:

1. Run a Redis&reg; pod that you can use as a client:

   kubectl run --namespace {{ .Release.Namespace }} redis-client --restart='Never' {{ if .Values.auth.enabled }} --env REDIS_PASSWORD=$REDIS_PASSWORD {{ end }} --image {{ template "redis.image" . }} --command -- sleep infinity

{{- if .Values.tls.enabled }}

   Copy your TLS certificates to the pod:

   kubectl cp --namespace {{ .Release.Namespace }} /path/to/client.cert redis-client:/tmp/client.cert
   kubectl cp --namespace {{ .Release.Namespace }} /path/to/client.key redis-client:/tmp/client.key
   kubectl cp --namespace {{ .Release.Namespace }} /path/to/CA.cert redis-client:/tmp/CA.cert

{{- end }}

   Use the following command to attach to the pod:

   kubectl exec --tty -i redis-client \
   {{- if and (.Values.networkPolicy.enabled) (not .Values.networkPolicy.allowExternal) }}--labels="{{ template "common.names.fullname" . }}-client=true" \{{- end }}
   --namespace {{ .Release.Namespace }} -- bash

2. Connect using the Redis&reg; CLI:

{{- if eq .Values.architecture "replication" }}
   {{- if .Values.sentinel.enabled }}
   {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h {{ template "common.names.fullname" . }} -p {{ .Values.sentinel.service.ports.redis }}{{ if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }} # Read only operations
   {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h {{ template "common.names.fullname" . }} -p {{ .Values.sentinel.service.ports.sentinel }}{{ if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }} # Sentinel access
   {{- else }}
   {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h {{ printf "%s-master" (include "common.names.fullname" .) }}{{ if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}
   {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h {{ printf "%s-replicas" (include "common.names.fullname" .) }}{{ if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}
   {{- end }}
{{- else }}
   {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h {{ template "common.names.fullname" . }}-master{{ if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}
{{- end }}

{{- if and (.Values.networkPolicy.enabled) (not .Values.networkPolicy.allowExternal) }}

Note: Since NetworkPolicy is enabled, only pods with label {{ template "common.names.fullname" . }}-client=true" will be able to connect to redis.

{{- else }}

To connect to your database from outside the cluster execute the following commands:

{{- if and (eq .Values.architecture "replication") .Values.sentinel.enabled }}
{{- if contains "NodePort" .Values.sentinel.service.type }}

    export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
    export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ template "common.names.fullname" . }})
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h $NODE_IP -p $NODE_PORT {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- else if contains "LoadBalancer" .Values.sentinel.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -w {{ template "common.names.fullname" . }}'

    export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ template "common.names.fullname" . }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h $SERVICE_IP -p {{ .Values.sentinel.service.ports.redis }} {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- else if contains "ClusterIP" .Values.sentinel.service.type }}

    kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ template "common.names.fullname" . }} {{ .Values.sentinel.service.ports.redis }}:{{ .Values.sentinel.service.ports.redis }} &
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h 127.0.0.1 -p {{ .Values.sentinel.service.ports.redis }} {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- end }}
{{- else }}
{{- if contains "NodePort" .Values.master.service.type }}

    export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
    export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ printf "%s-master" (include "common.names.fullname" .) }})
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h $NODE_IP -p $NODE_PORT {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- else if contains "LoadBalancer" .Values.master.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -w {{ template "common.names.fullname" . }}'

    export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ printf "%s-master" (include "common.names.fullname" .) }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h $SERVICE_IP -p {{ .Values.master.service.ports.redis }} {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- else if contains "ClusterIP" .Values.master.service.type }}

    kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ printf "%s-master" (include "common.names.fullname" .) }} {{ .Values.master.service.ports.redis }}:{{ .Values.master.service.ports.redis }} &
    {{ if .Values.auth.enabled }}REDISCLI_AUTH="$REDIS_PASSWORD" {{ end }}redis-cli -h 127.0.0.1 -p {{ .Values.master.service.ports.redis }} {{- if .Values.tls.enabled }} --tls --cert /tmp/client.cert --key /tmp/client.key --cacert /tmp/CA.cert{{ end }}

{{- end }}
{{- end }}

{{- end }}
{{- end }}
{{- include "redis.checkRollingTags" . }}
{{- include "common.warnings.rollingTag" .Values.volumePermissions.image }}
{{- include "common.warnings.rollingTag" .Values.sysctl.image }}
{{- include "redis.validateValues" . }}

{{- if and (eq .Values.architecture "replication") .Values.sentinel.enabled (eq .Values.sentinel.service.type "NodePort") (not .Release.IsUpgrade ) }}
{{- if $.Values.sentinel.service.nodePorts.sentinel  }}
No need to upgrade, ports and nodeports have been set from values
{{- else }}
#!#!#!#!#!#!#!# IMPORTANT #!#!#!#!#!#!#!#
YOU NEED TO PERFORM AN UPGRADE FOR THE SERVICES AND WORKLOAD TO BE CREATED
{{- end }}
{{- end }}